Description

BioGuard® Lo ’N Slo® reduces pH and total alkalinity in pool water. This product is generally easier to use and store than liquid muriatic acid. Keeping your pool’s pH level balanced is not only important for swimmer comfort; it also helps keep your equipment and pool finish in good condition. Swimmers may return to the pool only 15 minutes after application. You can slowly and safely reduce pH and total alkalinity with Lo N Slo.

• For lowering pH and total alkalinity
• Quick-dissolving and easy-to-measure
• Safer to store, transport and handle than liquid muriatic acid

Dosage pH between 7.7 to 8.0: .75 lb per 10,000 gallons of water.

Dosage pH between 8.1 to 8.4: 1.25 lb per 10,000 gallons of water.

Dosage pH above 8.4: 1.5 lb per 10,000 gallons of water.

Directions: Balance the total alkalinity in the pool water to 125-150 ppm. Pool pH should remain between 7.2 and 7.6 for the most effective use of chlorine. Test the pH using a reliable test method such as BioGuard® 4-Way Test Strips. If the test shows a pH above 7.6, then add this product to the pool water using the recommended dosage.

Add this product when the pool is not in use. Broadcast product into the deep end with the pump and filter running. Never add more than 1.5 lbs. of this product per 10,000 gallons of pool water at any one time. Allow the pool water to recirculate for two hours and retest the pH. Repeat treatment as necessary. Newly plastered pool may require frequent treatments for the first few weeks while the pool is “curing”. Do not add the product near metal fittings or allow the pH to drop below 7.2. Break up undissolved clumps of product that may remain on the bottom of the pool.

Do not add this product directly to pools with colored plaster surfaces.

Note: Severe eye and skin irritant. May be harmful if swallowed or inhaled. Keep out if reach of children.

Additional information